Gas Cooker & Hob Installation, Birmingham

Request a quote

Four details and we will get back to you to arrange a time. Prefer to talk? Call 07413 385767.

Cooker on an existing bayonet point £95; with a new connection up to £200; gas hob £180.

No travel charge within 10 miles of B20 2JS. Further out, £2 per mile may apply — always agreed before anything is booked. Full price list

Your name

Mobile number

PostcodeThe first part, such as B20, is enough.

What do you need?Choose a service…Boiler repair or breakdownEmergency (no heat, no hot water, leak)New boiler or replacementBoiler serviceLandlord gas safety certificate (CP12)Gas leak detection or trace (no smell now)Power flush / cold radiatorsRadiators, valves and TRVsPlumbing repairGas fire service or repairGas cooker or hob fittingSmart heating controlsHot water cylinder or immersion heaterLPG heatingHeat interface unit (HIU) service or repairAir source heat pump service or repairElectric boiler, water heater or thermal storeSomething else / not sure

What is happening? (optional)

Add email, boiler make or a preferred time (optional)

Email (optional)

Boiler make (optional)Not sure / not relevantWorcester BoschVaillantBaxiIdealGlow-wormPottertonMainViessmannIntergasATAGVokeraBiasiFerroliAristonOther

When suits you? (optional)No preferenceAs soon as possibleA weekday morningA weekday afternoonI am flexible

Photos help: you can send them on WhatsApp once your enquiry is in.

Request a quote

Sending this is an enquiry, not a booked appointment: we confirm a time with you first. We only use your details to reply. Privacy notice

Or book a confirmed time online, or WhatsApp us a photo

What the price depends on

£95 covers a straight swap where there is a sound existing bayonet point in the right place and the new cooker fits the gap. The price rises towards £200 where the connection point has to be moved, a new bayonet or rigid connection installed, or old pipework replaced. A built-in gas hob is £180, which includes up to 0.5 metres of gas pipe alteration to get the supply into position under the worktop.

Why it must be a registered engineer

Connecting a gas appliance is Gas Safe work. A cooker connected with the wrong hose, without a stability bracket, or into pipework that has never been tested, is a genuine risk — and it will be recorded as a fault on any future gas safety check. Retailers' delivery teams are frequently not permitted to connect, only to deliver.

What we check

• Tightness test on the installation before and after
• Correct hose type, length and orientation for the appliance
• Stability bracket or chain fitted where the manufacturer requires it
• Combustion performance and flame picture on each burner
• Ventilation and any openable window requirement for the room
• Adequate clearance to surrounding units and any overhead extractor

We will disconnect and take the old appliance out of the way, and if the new cooker turns out to be the wrong size for the gap, we will tell you before anything is cut.

Recent hob work

A landlord in Edgbaston had us replace a tired five-burner hob in a rental kitchen: old hob out, new hob into the same cut-out, connected in copper, tightness tested and every burner checked, all in one visit. See the photos and the write-up.

Prices

Listed prices are the price for the job as described. Where a new connection or pipework is needed, the price (up to £200) is confirmed with you before any work starts. No travel charge within 10 miles of B20 2JS; further out, £2 per mile may apply, agreed before booking. How our prices work.